Borg-locks BL 7000 Easicode Change instructions Manuel d'utilisateur télécharger pdf

Code Changing

BL7000 Easicode Change instructions

Step 1: Enter the currently programmed code into the keypad (as per fig.1).

Step 2: With the correct entered into the keypad the code change cam on the inside handle

can be turned from the 9o’clcok positioned black dot (as per fig.2) to the 12o’clock

positioned black dot (as per fig.3).

Please note under no circumstances should you need to force the code change key, if you

find the code change cam dose not move easily when using the supplied code change key,

an incorrect code has been input into the keypad. In the event that the code change key is

forced the code change spindle has been designed to twist prior to damaging the coding

chamber and therefore you will not be able to change the code. If you require a

replacement code change spindle Please call 01708 225700.

1 2

Code Changing BL7000 Easicode Change instructions Step 1: Enter the currently programmed code into the keypad (as per fig.1). Step 2: Wi

Page 2

Whilst holding the code change cam at the 12o’clock position (as per fig.3) turn the handle on the keypad side one full rotation (as per fig

Pas de commentaire

Borg-locks BL 7000 Easicode Change instructions Manuel d'utilisateur